Imaging Servers
The Imaging Servers tab provides a list of servers where the Imaging Server has been installed.
To add Imaging Servers, download and install the Imaging Server to your local network. Servers that have the Imaging Server installed are automatically reflected under Imaging Servers.
Imaging Server status must show Online for the targeted computers to have access to the Server and the Images and Drivers that have been added to that Server.
 | Deleting Imaging Servers will remove all associated Images and Drivers information. On WDS, images will not be deleted. |
 | Deep Freeze Cloud uses the Windows Imaging Format (WIM) for storing images for deployment. |
PXE Mode
PXE mode is disabled by default. You can enable or disable PXE mode for Imaging Servers that support PXE Booting. Imaging Servers must be online to enable/disable PXE mode.
To enable, select the Imaging Server(s) and then click Enable PXE Mode, and configure the PXE Settings.
 | PXE mode will always wipe the disk and will not honor the disk settings in the selected Deployment Package. |
To disable, select the Imaging Server(s) and then click Disable PXE Mode.
 | PXE mode works only for WDS Imaging Servers. |
PXE Settings
PXE settings are assigned to the Default Group, Manual Policy, and the first available Deployment Package by default.
Complete the following steps to configure the PXE settings associated with each Imaging Server.
1. Select the Imaging Server.
2. Click Edit PXE Settings.
3. Select your preferred Policy, Group, and Deployment Packages from the drop-down list.
4. Disk Options – Select to Choose Partition or Wipe Disk.
When you select to Choose Partition, specify the identification number of the disk to configure from the DiskID drop-down list, and the identification number of the partition to modify from the PartitionID drop-down list.
Selecting Wipe Disk will erase all data from the target computer.
5. Require the user to press the F12 key to continue PXE boot – When this option is enabled, users will be required to press the F12 key to be able to continue PXE boot.
6. Click Save.