Power Save
If Windows Power Management settings are enabled or any other third-party power saving measures are being used in the organization, then the actual power saving may be lower than that shown in the report.
Let’s say that Power Save and Windows Power Management are configured to put the computer on Standby at 10 pm and 11 pm respectively. Assuming Power Save takes action at 10 pm and puts the computer on Standby, the Power Save Reports take credit for savings from the moment the computer goes on Standby up to when the computer wakes up.
For each of the reports listed, you can select the following two types of report:
• Full Operation Report
> Include Windows Power Plan Savings – select this checkbox if you want to include the savings from Windows Power Plan.
• Audit Report
Optionally, select the Group to generate the report for the particular group. The results will include computers that belong only to the selected group.
Saving by Energy Consumption
Shows the savings for each Energy Consumption Profile on the computers. The following information is displayed:
• Energy Consumption Profiles & Savings
> Name
> Monitor On (watts)
> Monitor Standby (watts)
> Computer On (watts)
> Computer Standby (watts)
> Workstation Count
> Energy Saved (kWh)
> Savings ($)
• Detailed Power Save Performance Report
> Workstation Name
> Tags
> IP Address
> MAC Address
> Group
> Consumption Profile
> Monitor Standby (days)
> Computer Standby (days)
> Computer Off (days)
> Energy Saved (kWh)
> Energy Consumed (kWh)
> Savings ($)
Saving by Custom Power Policies
Shows the savings for each Policy on the computers. The following information is displayed:
• Custom Policies & Savings Report
> Name
> Workstation Count
> Average Savings ($)
> Energy Consumed (kWh)
> Energy Saved (kWh)
> Savings ($)
• Detailed Power Save Performance Report
> Workstation Name
> Tags
> IP Address
> MAC Address
> Group
> Policy
> Monitor Standby (days)
> Computer Standby (days)
> Computer Off (days)
> Energy Saved (kWh)
> Energy Consumed (kWh)
> Savings ($)
Top 25 Energy Savers
Shows top 25 computers that save the most energy. The computers ranked from 1 through 25, where 1 is the computer that has the highest dollar savings. The following information is displayed:
• Workstation Name
• Tags
• IP Address
• MAC Address
• Group
• Policy
• Monitor Standby (days)
• Computer Standby (days)
• Computer Off (days)
• Energy Saved (kWh)
• Energy Consumed (kWh)
• Savings ($)
Bottom 25 Energy Savers
Shows the 25 computers that save the least energy. The computers ranked from 1 through 25, where 1 is the computer that has the lowest dollar savings. The following information is displayed:
• Workstation Name
• Tags
• IP Address
• MAC Address
• Group
• Policy
• Monitor Standby (days)
• Computer Standby (days)
• Computer Off (days)
• Energy Saved (kWh)
• Energy Consumed (kWh)
• Savings ($)
Policy Configuration Report
Shows the Power Save Schedule settings along with the associated Power Events.
The following information is displayed:
• Policy Name
• Power Schedule
• Number of computers where the policy is applied
Select the report for All Power Save policies or a specific policy.